| From | Message |
steved
Dodge Dakota
JOIN HERE
3/04/2010
22:03:50
|
 Subject: obd 1and2 scanner
IP: Logged
Message:
looking for combo obd 1 and 2 scanner, must be able to show fuel inj. sync on obd1. any recomendions? thanks steve!
|
stevedak
Dodge Dakota
JOIN HERE
3/16/2010
07:03:13
| RE: obd 1and2 scanner
IP: Logged
Message:
I looked for an ODB I scanner that showed fuel
sync a couple years ago when I had my 92 Dakota.
I didn't find it in anything I looked at. I know the function is in the DRBII/III tool but those are expensive. I didn't find it on the snap-on 2500 but others say the snap-on has it.
|
daddio
Dodge Dakota
JOIN HERE
3/16/2010
09:00:36
| RE: obd 1and2 scanner
IP: Logged
Message:
Your best bet will be to use a laptop w/ software and cables. I have seen software for both OBD & OBDII w/ cables from $80.00 to $250.00. Just gotta search the webz.
|
Good Grief
Dodge Dakota
JOIN HERE
3/16/2010
11:00:12
| RE: obd 1and2 scanner
IP: Logged
Message:
This was asked on another board
and given all the same responses!
CHECK EBAY !!!!!!!!!!!!!!!!!!!!!
|
daddio
Dodge Dakota
JOIN HERE
3/16/2010
11:15:28
| RE: obd 1and2 scanner
IP: Logged
Message:
Yes, I remember it being here also. I guess some people just don't want to face the truth.
|
Mark
Forum Moderator
5/13/2010
22:37:23
| RE: obd 1and2 scanner
IP: Logged
Message:
To test obd1 you dont need a scanner. You just turn the key to accessories on then off then on then off then on... after that the check engine light will flash giving you the codes in the computer. If it flashes a 55 that means end of codes. If you get a 12, dont panic... it just means your batter was disconnected recently.
-Mark Hryckiewicz
1993 Sport RC SB 5.2L Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
