Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
21:05:05 - 04/26/2024

General Dakota Board
FromMessage
Al
Dodge Dakota
JOIN HERE
 Email

2/28/2010
23:19:04

Subject: Need TSB's Please
IP: Logged

Message:
Does anyone have access to TSB's? I need the following for my 2000 4.7 Dakota

082400

180900b





Chris G
Dodge Dakota
JOIN HERE
 Email

3/02/2010
21:59:47

RE: Need TSB's Please
IP: Logged

Message:
You better love me for this, as I had to type it out by hand - AllData won't let me copy the text. By the way, 180900b doesn't exist for your vehicle, so either you typed it wrong, or you were misinformed. But, my copy of AllData is Quarter-1 of 2009, so it's a year old.

Regardless, here is 082400:


NUMBER: 08-24-00
GROUP: Electrical
DATE: Sept. 8, 2000

SUBJECT:
Engine cranks but does not start or starts and stalls

NOTE:
This Bulletin applies to vehicles equipped with a vehicle theft alarm (VTA) system (Sales code LSA)

Discussion:

Part of "No Start" diagnosis on vehicles equipped with VTSS should include a verification check of the power supply to the Central Timer Module (CTM). The CTM provides the Powertrain Control Module (PCM) with an "Ok to start" message via the CCD bus. If the message is not received by the PCM, the PCM will not allow the engine to start. Initially, the engine may start and stall but will eventually not start at all. Most CTMs are supplied battery voltage through the pwoer door lock fuse. An inspection of the fuse should be one of the initial diagnostic checks performed. If the fuse is operational, a verification check of the communication system from the CTM can be performed using the DRBIII(R). Attempt to communicate to the CTM. If the CTM does not respond to the DRBIII(R), the DRBIII(R) will identify a "No response from Central Timer Module" message. A "No response..." message may indicate that the CTM is not powered up. Please refer to the "Communication" section of the appropriate Body Diagnostic Procedures Manual to assist in "No start" diagnosis due to communication problems from the CTM. In addition, the "Vehicle Theft/Security" section will aid in the diagnosis of "No Start" issues involving the VTSS system.

POLICY: Information Only



Al
Dodge Dakota
JOIN HERE
 Email

3/09/2010
23:51:41

RE: Need TSB's Please
IP: Logged

Message:


Hey, thanks for typing all of that Chris. Im still trying to detirmine if my rig has VTSS.


Thanks again



JasonB
Dodge Dakota
JOIN HERE


3/10/2010
22:31:13

RE: Need TSB's Please
IP: Logged

Message:
Here. Read all about it.
Copy this and paste it into your browser.

dodgeram.info/tech/operation/RKE/2001-VTSS.pdf



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.