| From | Message |
byce
Dodge Dakota
JOIN HERE
7/13/2008
18:35:55
|
 Subject: waterpump
IP: Logged
Message:
im replacing my waterpump on my 99 and the hose that goes to the heater core does not come with the new pump and the hole is not threaded how to i make the connection between the water pump and the hose any ideas?
|
calikota
Dodge Dakota
JOIN HERE
7/14/2008
10:29:54
|  RE: waterpump
IP: Logged
Message:
Hose clamp
|
shadetree
Dodge Dakota
JOIN HERE
7/14/2008
13:24:44
| RE: waterpump
IP: Logged
Message:
I beleive there is a tube with an o-ring that goes in there and is retained with a bolt then you slide the hose over that tube and use a hose clamp to hold in.
|
partsmanager
Dodge Dakota
JOIN HERE
7/14/2008
14:37:20
| RE: waterpump
IP: Logged
Message:
Pickup a new tube &make sure it hs the o-ring on it. after 9 years the thin metal of the tube will more than likely break when you try to remove it from the old pump. Its cheap insurance to replace the tube . like the guys who changed the older pumps and didnt replace the bypass hose and paid for it later when it split on the road. Trust me just replace the tube and lube the o-ring before you slide it in
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
