| From | Message |
shark3149
Dodge Dakota
JOIN HERE
6/26/2008
19:08:42
|
 Subject: need help
IP: Logged
Message:
I have a 93 dakota with a 318.I am having a problem with not getting any spark.I have replaced a few things(coil,cap,rotor,plugs,pickup coil,and the computor)The computor fixed the problem for about 3 weeks and now no more spark.I even checked the timming chain and it looks like new.I have only owned this truck for a few months.I have checked the wiring and fixed a few things that looked kind of iffy.I am now at a loss as to what to try next.I will be greatfull for any and all help.Thanks.
|
RadioMan
Dodge Dakota
JOIN HERE
6/26/2008
19:15:17
|  RE: need help
IP: Logged
Message:
Just replacing parts won't cure the problem,
shark3149. You're going to have get some help
with people that can trouble shoot using volt
meters and such.
Lots of luck and let us know what you find..
|
Dan M
Dodge Dakota
JOIN HERE
6/26/2008
20:24:34
| RE: need help
IP: Logged
Message:
could be the infamous 115 splice?
could also be a bad ground at the PCM. I ran into that on my old 95. I think it was pins 11 & 12. Check the haynes manual for the pcm wiring. pull the pcm connector off and check it with multimeter.
- Dan M
|
shark3149
Dodge Dakota
JOIN HERE
6/27/2008
19:29:56
| RE: need help
IP: Logged
Message:
Thanks guys.I think I fixed it.I found I had a problem with the splice.Thanks to all that helped.I will be taking it to the dealler after the holiday just to be sure.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
