Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
02:27:49 - 04/23/2024

General Dakota Board
FromMessage
Slvr02DQuad
Dodge Dakota
JOIN HERE
 Email

11/16/2007
15:02:56
 Subject: Break caliper hanger?
IP: Logged

Message:
Well, I had a clunking noise in the front end while breaking, with noticeable feel in break pedal. This was a while ago.

Brought it into local shop. Told me that the break caliper hanger wears that the caliper is riding on, and can sometimes fall into the wear groove, giving the clunk and feel in pedal. Passed inspection anyways and told does not interfere with breaking. Told them it was anoying as all hell, they "welded" the hanger, to fill in the wear.

Now less than 10K later, same thing. Question is, can I have the caliper hanger replaced? Anyone else have this issue and successfully get rid of the PITA clunking in the front while breaking? HOw much am I looking at to fix this thing for good?

Mason

2002 QC, SLT 4x4, 4.7L 16"wheels, and just found out have a 9.25 rear... the hard way..



brianj
Dodge Dakota
JOIN HERE
 Email

11/17/2007
03:50:49
 RE: Break caliper hanger?
IP: Logged

Message:
there are shims that you actually put on the brake pad. its a hardware kit that you can get for a couple bucks at the part store that will fix the prob.

ive done this dozens of times in my shop. its a real common problem.



pete
Dodge Dakota
JOIN HERE


11/19/2007
12:25:58
 RE: Break caliper hanger?
IP: Logged

Message:
Be sure you didn't strip out your caliper mounting bolts...???



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages

Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.