| From | Message |
Randy
Dodge Dakota
10/01/2001
13:17:49
|
 Subject: Overhead Console
IP: Logged
Message:
Can someone tell me how to remove the overhead console? I've removed the screw on the front and removed the reading/map light covers but can not find another screw anywhere. It is loose but will not pull down. I've tried 3 different times and still can not find the secert!
Help
btw it's a 2001 QC.
|
Kevin
Dodge Dakota
10/01/2001
15:25:21
|  RE: Overhead Console
IP: Logged
Message:
I had the same problem. I think you've found the 2 screws so now you just have to pull down on the console very carefully but hard obviously not breaking it :-)
|
ken
Dodge Dakota
10/02/2001
21:31:41
| RE: Overhead Console
IP: Logged
Message:
After removing the front screw just pull near the back of the console and it should pop loose.It is held with 2 clips.
|
Randy
Dodge Dakota
10/03/2001
14:39:33
| RE: Overhead Console
IP: Logged
Message:
Thanks guys. That's just what I needed. You are all right in my book!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
