Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
00:18:10 - 04/25/2024

General Dakota Board
FromMessage
Dex
Dodge Dakota
JOIN HERE


5/08/2006
11:45:32

Subject: Mud Flaps - Recommendations
IP: Logged

Message:
I have a 2000 4X4 Dakota Quad Cab with flares.
Do you have any recomendations for easy to install mud flaps?
thanks



Kowalski
GenIII
 User Profile


5/11/2006
16:34:15

RE: Mud Flaps - Recommendations
IP: Logged

Message:
I went with the cheap non-contoured mopar ones. Installed myself; all still there after 5 years.

Lead, follow, or get out of the way

Obio3
Dodge Dakota
JOIN HERE


5/11/2006
22:30:46

RE: Mud Flaps - Recommendations
IP: Logged

Message:
I put the nice big ones that say MONTANA on them. Nice flaps. On my 99 4x4 CC There was some metal screws holding the plastic liner on to the back side of the wheel well. I got some a bit longer plus a size bigger and I measured real carefull to get the flaps streight. I also drilled a couple of extra mountain holes giving 4 all toll but 2 with bolt, lock nut and fender washers.Still made a mistake. I like them closer to the ground and at the lake one day backing the trailor to the boat I found a rock sticking up about 3 inches and ripped the flap and plastic off. Had to buy new plastic, cheap, and flap was good. but I shortened it 2 inches and never had the problem again

So many problems .... So little time



calikota
Dodge Dakota
JOIN HERE
 Email

5/20/2006
08:57:48

RE: Mud Flaps - Recommendations
IP: Logged

Message:
I got some contoured mopar ones that has the ram head off of ebay. Be patient when looking for them however, it took me a couple of months of checking ebay. I got the "deluxe" ones.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.