Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
09:57:28 - 04/25/2024

General Dakota Board
FromMessage
95DAK318
Dodge Dakota
JOIN HERE
 Email

3/27/2006
14:57:04

Subject: Which rearend do I have?
IP: Logged

Message:
I need to pull the rearend cover, but I don't know which rearend I have to get the right gasket? I have a '95 5.2L Mag, AT, 2WD, I believe it is Posi (or whatever Dodge calls it), any help?



Kowalski
GenIII
 User Profile


3/27/2006
16:53:12

RE: Which rearend do I have?
IP: Logged

Message:
The different rears can be identified by the # of bolts for the cover - most or all were available with limited slip.

Lead, follow, or get out of the way

95DAK318
Dodge Dakota
JOIN HERE
 Email

3/28/2006
12:19:23

RE: Which rearend do I have?
IP: Logged

Message:
I know that, however the 10 bolt lists a 7.25 or a 8.25 inch pattern. No matter, I called my mechanic and NAPA and they both said to use gasket maker RTV. thanks.



ScojoDak
Dodge Dakota
JOIN HERE


3/28/2006
12:24:15

RE: Which rearend do I have?
IP: Logged

Message:
I know many who have used the RTV only for sealing the rear end cover.



95DAK318
Dodge Dakota
JOIN HERE
 Email

3/28/2006
12:31:20

RE: Which rearend do I have?
IP: Logged

Message:
That is what I need it for just the cover.

Do I have to totally disassemble the axles and everything to remove the large ring gear?

There was a tab on the cover bolt that says 3.9, does that mean I have 3.90 gear ratio?



HeeHaw
Dodge Dakota
JOIN HERE


3/28/2006
12:40:46

RE: Which rearend do I have?
IP: Logged

Message:
Hopefully you have the rearend that allows you to flatulate when needed and take a dump when your systems becomes full of excrement.

If you are a guy, hopefully you have a rearend which is an exit, not and entrance.





Good Luck
Dodge Dakota
JOIN HERE


3/28/2006
13:53:35

RE: Which rearend do I have?
IP: Logged

Message:
"Do I have to totally disassemble the axles and everything to remove the large ring gear?"

Yes. The axles are held in place with c-clips in the diff unit. They gotta come out before you can remove the diff unit so you can then remove the ring gear.
When you pull the axles, don't f**k up the oil seals, or oil will slowly leak out all over your brakes while you're driving.



95DAK318
Dodge Dakota
JOIN HERE
 Email

3/28/2006
14:25:51

RE: Which rearend do I have?
IP: Logged

Message:
Well then maybe I won't pull them.

How hard is it to get the bed off?



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.