| From | Message |
1987Dakota
Dodge Dakota
9/10/2001
23:19:44
|
 Subject: Transmission Q's
IP: Logged
Message:
I want to put a 5 speed manual tranny into my Dakota. I currently have the 3 speed automatic in it right now. What all would it take to convert my truck to a manual tranny? I already know what tranny I need that will bolt right up to the engine. Do I need a different flywheel, driveshaft, mounting bracket? If you have any experience in this type of job please help me! I want to make sure I have all the right stuff before doing this. Thanks in advance!
Nick
|
Brian Gaarder
Dodge Dakota
9/10/2001
23:29:08
|  RE: Transmission Q's
IP: Logged
Message:
For starters you will need a new wire harness, PCM, new flywheel, presure plate, clutch disk, clutch slave and master cylinder,....
|
1987Dakota
Dodge Dakota
9/11/2001
23:06:34
| RE: Transmission Q's
IP: Logged
Message:
Well, I know I dont have a PCM, only a spark controll computer, and thats the only computer there is on my truck. But do I still need a different wiring harness, or can I get away with it?
|
1987Dakota
Dodge Dakota
9/12/2001
22:50:29
| RE: Transmission Q's
IP: Logged
Message:
Any more input from anyone?
|
1987Dakota
Dodge Dakota
9/14/2001
17:47:40
| RE: Transmission Q's
IP: Logged
Message:
.
|
1987Dakota
Dodge Dakota
9/19/2001
23:05:09
| RE: Transmission Q's
IP: Logged
Message:
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
