| From | Message |
Cowboy1
Dodge Dakota
JOIN HERE
1/10/2006
07:20:43
|
 Subject: ABS light and Brake light on
IP: Logged
Message:
Alright here is my problem that I am having with my 99 Dak cc 5.2 4x4.
My ABS light and brake light came on a while ago. So I replaced the sensor in the rear axle and replaced the ABS Control unit under the hood. I reset the computer and when I start the truck the lights go out. As soon as I hit 35-40 mph the lights come on and stay on untill I shut off the truck. I cant figure out what it could be. Any advice would be appreciated. those warning lights are getting annoying.
Cowboy1
99 DAK cc 5.2 4x4
|
slickwill
Dodge Dakota
JOIN HERE
1/10/2006
07:23:53
|  RE: ABS light and Brake light on
IP: Logged
Message:
I would say looking the haynes guide and see what relays control that. Because it sounds to me like a bad relay somewhere.
|
?
Dodge Dakota
JOIN HERE
1/10/2006
08:52:47
| RE: ABS light and Brake light on
IP: Logged
Message:
Wiring harness back to that sensor ?
Have you been off-roading , or doing anything
else below the truck ??
|
Cowboy1
Dodge Dakota
JOIN HERE
1/10/2006
09:22:20
| RE: ABS light and Brake light on
IP: Logged
Message:
I haven't been off roading , I checked the wiring harness last night and everything is fine. No moisture in the harness plugs , the plugs are tight fitting. So I don't know what else it could be.
Cowboy1
99 DAK cc 5.2 4x4
|
WardenJ
Dodge Dakota
JOIN HERE
1/10/2006
11:32:18
| RE: ABS light and Brake light on
IP: Logged
Message:
Check the front speed sensors. One of mine was shorting out against the inside of the wheel because the insulation had rubbed completely down to bare wire.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
