Forums
Forum Tools
|
 |
18:14:13 - 04/18/2024
General Dakota Board
| From | Message |
98Dako
Dodge Dakota
JOIN HERE
11/19/2005
15:54:56
|
 Subject: replacing radiator
IP: Logged
Message:
I need to replace the radiator on my '98 5.2. It has a 5sp so I shouldn't have tranny lines to worry about, right?
Anyway, I took the shroud off and can only find two bolts, near the top, holding it in. Are there some others I am missing or does the bottom just rest on the crossmember thing?
Since I haven't done it before, this is my plan after looking it over.
-unbolt shroud (done)
-unbolt two radiator bolts
-disconnect upper/lower hoses
-disconnect overflow line
-lift out
install is the reverse of removal
It seems too simple. What am I missing?
Thanks (patiently waiting as the sun goes down)
|
Brian22
Dodge Dakota
JOIN HERE
11/19/2005
16:09:45
| RE: replacing radiator
IP: Logged
Message:
If you have a fan clutch, i would remove that as well that way you will have more room to work , and wont risk hitting the new radiator into the fan and damaging it
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
