Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
17:16:23 - 03/28/2024

General Dakota Board
FromMessage
Super Bee
GenI
 Email User Profile


11/04/2005
10:34:28

Subject: GenI parts
IP: Logged

Message:
if anyone needs anything for a genI v6 i have them, the whole enginhe/tranny is sitting in the back of the truck
it has a reman alternator that i only had on for about 5000 miles. same goes for a 1990 reman. PCM
all other parts are original, i will sell them cheap



modain
GenIII
 Email User Profile


11/04/2005
11:41:44

RE: GenI parts
IP: Logged

Message:
Funding source for your BB transplant? :-)

=========================================
2002 Graphite QC SLT Plus, 4.7L, NV3500, Superchips 3715, 3.92 LSD, loads o'fun...
2001 Patriot Blue Durango SLT, 4.7L, 45RFE, Superchips 3715, 3.55 Open (for now)
1999 Forrest Green Dakota RC Sport, 2.5L, NV1500, 3.55 Open


Jasonb61
Dodge Dakota
JOIN HERE
 Email

11/04/2005
12:26:53

RE: GenI parts
IP: Logged

Message:
Just drivetrain parts? No body parts or anything? (Just wondering) I'm interested in the tranny but where are you located?

Thanks,
-Jason



modain
GenIII
 Email User Profile


11/04/2005
13:11:05

RE: GenI parts
IP: Logged

Message:
This is why he's selling the drivetrain and not anything else...

=========================================
2002 Graphite QC SLT Plus, 4.7L, NV3500, Superchips 3715, 3.92 LSD, loads o'fun...
2001 Patriot Blue Durango SLT, 4.7L, 45RFE, Superchips 3715, 3.55 Open (for now)
1999 Forrest Green Dakota RC Sport, 2.5L, NV1500, 3.55 Open


Jasonb61
Dodge Dakota
JOIN HERE
 Email

11/04/2005
13:21:51

RE: GenI parts
IP: Logged

Message:
Ya, I came across that and put it together AFTER that post and I was hoping no one would pay attention to me lol... Ah well, I'm still interested in the tranny depending on location.

-Jason



modain
GenIII
 Email User Profile


11/04/2005
14:08:52

RE: GenI parts
IP: Logged

Message:
Don't worry about it. Sometimes I post before reading everthing I should have... We all are guilty at some point.

=========================================
2002 Graphite QC SLT Plus, 4.7L, NV3500, Superchips 3715, 3.92 LSD, loads o'fun...
2001 Patriot Blue Durango SLT, 4.7L, 45RFE, Superchips 3715, 3.55 Open (for now)
1999 Forrest Green Dakota RC Sport, 2.5L, NV1500, 3.55 Open


Super bee
GenI
 User Profile


11/06/2005
02:33:11

RE: GenI parts
IP: Logged

Message:
im in WIsconsin

and its not a BB transplant, its just a 318



Mopar318
Dodge Dakota
JOIN HERE


11/06/2005
13:40:21

RE: GenI parts
IP: Logged

Message:
So you putting the MPI magnum 318 in your gen I? Sounds pretty cool...



intensedak39
*GenIII*
 User Profile


11/06/2005
16:53:57

RE: GenI parts
IP: Logged

Message:
he's already done it... tight fit, but looks good!





Super bee
GenI
 User Profile


11/08/2005
10:00:36

RE: GenI parts
IP: Logged

Message:
anyone else lookin for parts?



Mopar318
Dodge Dakota
JOIN HERE


11/08/2005
11:55:30

RE: GenI parts
IP: Logged

Message:
Your going to confuse a lot of dakota owners when you pop that hood. Dont those gen I 4X4's only weigh like 3800 pounds



Jasonb61
Dodge Dakota
JOIN HERE
 Email

11/08/2005
14:24:20

RE: GenI parts
IP: Logged

Message:
When they weighed my truck at the junk yard, they said my 1992 4x2 dakota only weighed 2000lbs... Anyone think thats's correct or what?



Super bee
GenI
 User Profile


11/08/2005
15:21:55

RE: GenI parts
IP: Logged

Message:
actualy i think the curb weight on my truck was like 3200 before the swap
http://www.autotrader.com/research/model_info/modelinfo_overview.jsp?yearList=1990&makeList=Dodge&modelList=847&vehicle_number=10891&restype=used&x=56&y=5
well, acording to autotrader its curn weight (not sure what that is) "Curb Weight 2699 lbs
but i look up the same thing for 1990 and it gave GVW of 5000+
so im not sure, id have to go take it to a scale





Super bee
GenI
 User Profile


11/08/2005
15:23:42

RE: GenI parts
IP: Logged

Message:
here is the model info for the truck i pulled the v-8 out of
http://www.autotrader.com/research/model_info/modelinfo_technicalspecs.jsp?vehicle_number=8643&modelList=2569&makeList=Dodge&y=12&x=59&yearList=1995&restype=used




Super bee
GenI
 User Profile


11/09/2005
00:44:04

RE: GenI parts
IP: Logged

Message:
IM going to confuse dakota owner?
its a 318 in a dakota, not so confusing
look under the hood of intese's truck, that will confuse someone
hey greg, got any underhood shots?, hell the rear suspension would confuse them too



Mopar318
Dodge Dakota
JOIN HERE


11/09/2005
09:52:50

RE: GenI parts
IP: Logged

Message:
If the person knew that gen I daks didnt have "magnum engines" then they would be a bit confused. I could tell right away if its a magnum by looking at the valve covers.



intensedak39
*GenIII*
 User Profile


11/09/2005
10:27:51

RE: GenI parts
IP: Logged

Message:
it shouldnt confuse anyone... the fact that the only genI V8 was a shelby, it's pretty obvious that he did a motor swap, because he aint got no shelby.





Image hosted by Photobucket.com

i dont have that POS carb anymore.. but other than that, that's what it last looked like. Expect big changes in the future!



Super bee
GenI
 User Profile


11/09/2005
14:42:42

RE: GenI parts
IP: Logged

Message:
*NUT* ,oh darn, now i have to go change my undies



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.