| From | Message |
bykerdude59
Dodge Dakota
JOIN HERE
8/11/2005
16:39:36
|
 Subject: Have you had fog light problems?
IP: Logged
Message:
I have read through the posts to determine that my fog lights arent working because of the chincy switch dodge put in it. Anyhow, I took apart the switch assembly to find the switch is indeed broken. I have the switch assembly where it inlcudes the dome light roller switch. The fogs are on the same knob as the headlights. Turn the switch for headlights, pull for fogs.
Anyhow I ordered the part from newdodgeparts.com when I received the part it was just a push botton switch..obviously not the correct one for my truck (although they say it is for a 98-99 dakota) they are full of it. Now they tell me that I have to order the entire assembly even though it is just on small part of the assembly that is messed up.
Have you guys/gals ever had this problem...am I s.o.l. and out $65 - $85 for the entire assembly?
|
RadioMan
Dodge Dakota
JOIN HERE
8/12/2005
06:47:55
|  RE: Have you had fog light problems?
IP: Logged
Message:
I had the problem in a 01 Ram. Insted of spending
big bux for a overpriced junk switch, I just
went to my local Radioscrap store, bought a switch
and rewired the fog lights to that switch. The
added plus was now I could run the high beams plus
the fog lights at the same time if I wanted to.
|
slopehead
Dodge Dakota
JOIN HERE
8/13/2005
15:23:20
| RE: Have you had fog light problems?
IP: Logged
Message:
"97 was the last year for the push button switch. They sent you the wrong one.They need to be good guys and take back the wrong part and send you the right one.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
