Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
07:29:10 - 04/26/2024

General Dakota Board
FromMessage
Smak Dak
Dodge Dakota
JOIN HERE


5/19/2005
20:39:44

Subject: Tires n wheels
IP: Logged

Message:
If I put larger tires/rims on my truck - I will lose a little power and torque to those wheels. If so.... If I put smaller tires/rims will I gain power and torque to those wheels? Would this be like changing the rear end gear ratio?



um
Dodge Dakota
JOIN HERE


5/19/2005
22:33:14

RE: Tires n wheels
IP: Logged

Message:
if i told you you could get 100 horsepower right now by switching, would you install 8"x4" rims ?



Smak Dak
Dodge Dakota
JOIN HERE


5/20/2005
20:52:09

RE: Tires n wheels
IP: Logged

Message:
I was hoping for intelligent information - I have P235/R15 and was considering a slightly smaller tire if I would gain some torgue.



GB2000
GenIII
 User Profile


5/20/2005
21:13:21

RE: Tires n wheels
IP: Logged

Message:
Yeah, there would be some gains by going with a smaller wheel/tire combination but I doubt it'd be very noticeable except on a dyno.




Josh Blackshire - Owner, Ohio Dakotas .NET
Red 98 Dakota Sport - Check it out!

um
Dodge Dakota
JOIN HERE


5/20/2005
21:19:18

RE: Tires n wheels
IP: Logged

Message:
well, would you



Hammerdak
Dodge Dakota
JOIN HERE


5/23/2005
21:41:54

RE: Tires n wheels
IP: Logged

Message:
Smak Dak
Here's some figures on losses and gains .
If you go up in tire diameter by 1" from 30" to 31" then you go from 295ft/lb to 285.5ft/lb . Conversely if you go down from 30" to 29" you go from 295ft/lb to 304.8ft/lb.
(These figures are based on my math and may not reflect real world changes.)
A 1 1/2" increase or decrease in diameter changes things from 295ft/lb to 280.7ft/lb or 309.7ft/lb respectively.

On the other hand , a gear swap from 3.55 to 3.92 will change torque from 295 to 325 effectively.






Smak Dak
Dodge Dakota
JOIN HERE


5/24/2005
20:24:08

RE: Tires n wheels
IP: Logged

Message:
THX Hammerdak -

I already have 4.10 gears and I just happen to have a supercharger and a few other goodies. I'm needing new tires and am wanting all the torgue I can get. I'm runnin Michlin P235/75R. These tires are tall enough to rub when I turn (stock size is P195/...) Do ya think I should go down a size?



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.