Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
20:29:32 - 04/19/2024

General Dakota Board
FromMessage
04sport
Dodge Dakota
JOIN HERE


12/19/2004
20:53:05

Subject: NV3500 with 4.10's?
IP: Logged

Message:
I have an '04 CC 2wd. 4.7 5spd. It currently has a 3.55 limited slip and I am looking to change the ratio. I was wondering if anyone has 4.10's with the NV3500 5spd. because I don't want to end up with a useless first gear.



.boB
Dodge Dakota
JOIN HERE


12/19/2004
22:00:53

RE: NV3500 with 4.10's?
IP: Logged

Message:
The differance is minimal. The NV3500 has a 4.01 first gear ratio. Seems pretty low, but with a 30" tire, it's pretty good.

So, lets pick an arbitrary shift point of 3,000 rpm. With the 3.55 gear, you'll be shifting at about 19mph. With a 4.10 gear, you'll be shifting at about 16mph. Only a 3 mph differance. Not enough to worry about for the extra torque application you'll be gaining.

However, at the top end is where it really makes a differance. With the 4.1 gear, you'll be turning 2000rpm at 65 mph. With the 3.55, you be turning 1600rpm at the same speed.

If you normally cruise at 55-60mph, the 4.1 gear is better. But if you normally cruise at 75-80mph, the 3.55 is better. Your call.




   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.