| From | Message |
SR
Dodge Dakota
JOIN HERE
10/27/2004
19:20:09
|
 Subject: Activating Horn Chirp with Power Locks
IP: Logged
Message:
Does anyone know how to REACTIVATE the horn chirp which accompanies the remote power locks? There is a procedure in the owner's manual to disable it, but repeating this process does not reactive it. I have an 03 QC. Thanks.
|
greendak
Dodge Dakota
JOIN HERE
10/27/2004
21:56:06
| RE: Activating Horn Chirp with Power Locks
IP: Logged
Message:
is there any way to make the horn chirp with the door locks on a gen3?
|
prple-gaseatr
Dodge Dakota
JOIN HERE
10/27/2004
22:07:30
| RE: Activating Horn Chirp with Power Locks
IP: Logged
Message:
good question...
|
Justi
Dodge Dakota
JOIN HERE
10/27/2004
22:59:00
| RE: Activating Horn Chirp with Power Locks
IP: Logged
Message:
On my '03 QC (Obviously a Gen3) mine "chirped" with the door lock when I brought it home from the dealer. Because I take the truck hunting I quickly found in the owners manual how to disable it, which I did. Right after that was a section on how to reenable it so I would check the book first. And it's picky so make sure you're doing the steps completely and try more than once if it fails.
So to the second question, yes, on at least some Gen3's you can have the horn acknowledgement that the doors were locked with the FOB.
|
greendak
Dodge Dakota
JOIN HERE
10/28/2004
13:35:58
| RE: Activating Horn Chirp with Power Locks
IP: Logged
Message:
my truck is a 97 and I want the horn to "chirp" when I lock the doors w/ the keyless entry.
|
DakHunter
Dodge Dakota
JOIN HERE
10/28/2004
15:33:39
| RE: Activating Horn Chirp with Power Locks
IP: Logged
Message:
I want to turn it off... How? (2001 CC)
|
SR
Dodge Dakota
JOIN HERE
10/28/2004
15:50:10
| RE: Activating Horn Chirp with Power Locks
IP: Logged
Message:
Dakhunter
According to the 03 owner's manual and shop manual, to disable the horn chirp:
1) Turn the ignition to ON (the owner's manual also recommends fastening the seatbelt, to shut up the seatbelt chime)
2) Hold the transmitter LOCK button down for four seconds.
3) While pressing the lock button, press the PANIC button within 6 seconds.
4) Release both buttons when a single chime is heard.
Supposedly, you can repeat this to enable the chirp (although, for some reason, I never get that single chime in step 4, nor does the chirp return).
Or the dealer can enable/disable the chirp with using a "DRB III" scan tool.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
