| From | Message |
ebolavirs
Dodge Dakota
JOIN HERE
6/02/2004
21:16:41
|
 Subject: torque specs needed for caliper bolts
IP: Logged
Message:
I am changing the rotors and pads on my 2002 QC 4x4. Anyone help me out with the torque specs on the caliper bolts...they are hex or torx type bolts... any help would be appreciated
|
dogliftsleg
Dodge Dakota
JOIN HERE
6/03/2004
20:39:23
| RE: torque specs needed for caliper bolts
IP: Logged
Message:
pees and says "get off your lazy arse and go to the local library and look it up in the auto repair section"
|
03
Dodge Dakota
JOIN HERE
6/03/2004
21:59:46
| RE: torque specs needed for caliper bolts
IP: Logged
Message:
22 ft lbs on an 03,but they are different calipers. better than your last answer anyway,good luck.
|
JayO
Dodge Dakota
JOIN HERE
6/04/2004
12:34:28
| RE: torque specs needed for caliper bolts
IP: Logged
Message:
Factory manuel saids 22ft lbs for 2002 also and the brake hose should be torqued to 18ft lbs
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
