| From | Message |
Paul
Dodge Dakota
JOIN HERE
5/12/2004
15:43:57
|
 Subject: Inside door panel.
IP: Logged
Message:
Has anyone removed the fabric accent panel on their 03' door panel. I took the entire panel off the door to see if the accent panel was screwed or clipped to it from the inside but no such luck. It looks like it can be removed but I'm not sure how.
|
maybe
Dodge Dakota
JOIN HERE
5/12/2004
16:26:54
| RE: Inside door panel.
IP: Logged
Message:
You could probably get it off the panel, but getting it to go back on would be the real trick.
Remove the 'melted' spots and remove, hot glue it back on(?)
|
Paul
Dodge Dakota
JOIN HERE
5/12/2004
18:45:36
| RE: Inside door panel.
IP: Logged
Message:
Thanks, thats kinda what I was thinking. Getting it off some how and then permenatly reatatching with some kind of plastic adhesive or like you said hot glue. There isnt any info on it in the manual.
|
maybe
Dodge Dakota
JOIN HERE
5/12/2004
21:10:56
| RE: Inside door panel.
IP: Logged
Message:
Probably not serviced separately from the Dodge boys. Maybe an epoxy would hold up better in the long run.
|
Demon
Dodge Dakota
JOIN HERE
5/13/2004
06:07:16
| RE: Inside door panel.
IP: Logged
Message:
I used contact cement to put mine back on. Holding for 3 months so far.
|
RT in DC
Dodge Dakota
JOIN HERE
5/13/2004
07:31:26
|  RE: Inside door panel.
IP: Logged
Message:
This is a little more work but I drilled mine with a very small hole and put small screws with big flat heads it is more work however if you want to take them off and re-do them it is easier and a little more stable I would imagine.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
