Forums
Forum Tools
|
 |
09:57:53 - 04/26/2024
General Dakota Board
| From | Message |
2offroad
Dodge Dakota
JOIN HERE
5/05/2004
13:45:09
|
 Subject: 8.25 rearrend
IP: Logged
Message:
i have a '98 XJ with a 8.25 29 spline and emailed both eaton and detroit about e-lockers this is the responce i got.
Mr. Sechler-
We appreciate your interest in our products.
We expect have the Dana 30 Electrac available before the end of the year.
It will be among the first models with internal activation and will allow
you to retain your factory differential cover. An 8.25 Electrac is not
planned at this time. We are just now prototyping the 8.25 Truetrac limited
slip unit. An 8.25 Electrac will not be built unless demand increases
substantially(we have had very few requests for an 8.25 Electrac).
Scott Frary
Aftermarket Sales Manager
Tractech Inc.
Mark:
The Dana 30 ELocker is not scheduled for release until next year. The
Chrysler 8.25 is not scheduled for production yet.
Regards,
Jeff Phillips
Eaton Automotive
so if you want/need a e-locker contact them so they will make one.
just thought i would past the info along.
__________________
Mark Sechler
|
2offroad
Dodge Dakota
JOIN HERE
5/07/2004
13:42:20
| RE: 8.25 rearrend
IP: Logged
Message:
i posted on NAXJA, dakota, durango, and liberty sites, so if you even think you may want a e-locker in the future contact them.
detroit http://www.tractech.com/ContactUs.htm
eaton http://www.traction.eaton.com/email.htm
yes i know i using y'all for my own gain. i want a eaton e-locker.
__________________
Mark Sechler
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
