| From | Message |
MR_E
Dodge Dakota
JOIN HERE
4/14/2004
01:24:16
|
 Subject: Which year for R/T?
IP: Logged
Message:
I love dakotas and have a 93 dakota 3.9L ... its been good to me but... I want to move on up... I've been really wanting to get a used R/T but not sure which year is best... is there any difference (because on one of the forums... there were some complaints about adding low end torque to the 99). Which year do you recommend ? Any tips will be helpful ..thanks!
|
Big O
GenII
4/14/2004
11:32:19
|  RE: Which year for R/T?
IP: Logged
Message:
That's funny, because I have a 93 3.9 too and I'm buying a 99 R/T this weekend.
Everyone with an 88-96 dak needs to get in on the custom
gauge group buy. We only need 13 more. www.speedhut.com
|
kotart13
Dodge Dakota
JOIN HERE
4/14/2004
22:18:30
| RE: Which year for R/T?
IP: Logged
Message:
although some may tell you elsewise, i really dont think there is a diff powerwise through out the years. some people have slower trucks, some have faster, its just luck of the draw - no vehicle is created equally.
with that said i have a black 99 rc, we all know those are the fastest! good luck on your choice!
|
islander
Dodge Dakota
JOIN HERE
4/14/2004
23:05:03
| RE: Which year for R/T?
IP: Logged
Message:
pick any year.
it's the mods you choose for it that matter most.
you can join the yahoo dakota r/t forum..and the delphi r/t forum to start learning up.
|
00R/T CC
Dodge Dakota
JOIN HERE
4/15/2004
10:51:57
| RE: Which year for R/T?
IP: Logged
Message:
Something to keep in mind, Mopar Perf. only makes PCMs up to 2000 model year. So if you're planning upgrading to one, get a '00 or older.
|
EyeTrip
R/T
4/15/2004
23:06:34
| RE: Which year for R/T?
IP: Logged
Message:
I traded my 93 3.9 for 00 R/T. What 00R/T CC said is good advice.
M1, Headers, Transgo shit kit, MSD/BTM ignition, MP PCM, 3.5
|
EyeTrip
R/T
4/15/2004
23:11:50
| RE: Which year for R/T?
IP: Logged
Message:
My signature was missing.
2000 CC R/T 52mm TB, M1, 2.02 R/T heads (polished chambers), headers 3.5" exhaust, flowmaster 40 single, MP PCM, removed engine driven fan(It's back on now Damnit), MSD ign-BTM, Taylor "409" plug wires with boots, Keith Black pistons, 5140 rods, ARP head studs, Hotchkis suspension 2/3 drop, Transgo shift kit, lot's of little stuff! More to come!
|
MR_E
Dodge Dakota
JOIN HERE
4/16/2004
01:27:17
| RE: Which year for R/T?
IP: Logged
Message:
this is some good advice...thanks! 2000 or older... probably gonna look for 2000... now... where to start :P i see lots of regular dakotas but nah.. like I said moving on up... everytime I see an r/t I can't help but drool haha
|
00R/T CC
Dodge Dakota
JOIN HERE
4/16/2004
10:54:34
| RE: Which year for R/T?
IP: Logged
Message:
Nice truck, Eye. Same color as mine even, but you've got a few more mods than I do.
|
EyeTrip
R/T
4/16/2004
13:17:12
| RE: Which year for R/T?
IP: Logged
Message:
Thanks 00R/T CC. As soon as I figure out a good fuel return, I'm putting the powerdyne back on. Then I will feel like it runs like an R/T should.
2000 CC R/T 52mm TB, M1, 2.02 R/T heads (polished chambers), headers 3.5" exhaust, flowmaster 40 single, MP PCM, removed engine driven fan(It's back on now Damnit), MSD ign-BTM, Taylor "409" plug wires with boots, Keith Black pistons, 5140 rods, ARP head studs, Hotchkis suspension 2/3 drop, Transgo shift kit, lot's of little stuff! More to come!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
