| From | Message |
Steve C.
Dodge Dakota
JOIN HERE
1/16/2004
12:11:46
|
 Subject: Torque specs for shocks??
IP: Logged
Message:
Anyone know what the torque specs are for front and rear shocks for a 2000 V8 4x4? Do I apply Loctite when I tighten them?
I replaced the stock shocks with Monroe Reflex. After about a month the rears are starting to clunk over sharp bumps. I never torqued them to spec, I just tightened them but obviously not enough since they were a little loose when I just checked them.
Thanks!
|
jeremiah2360
Dodge Dakota
JOIN HERE
1/16/2004
16:39:57
|  RE: Torque specs for shocks??
IP: Logged
Message:
as per 03 service manual;
front: upper shock nut must be replaced or use Mopar Lock `N Seal or Loctite 242 on existing nut. Lower-80 ft. lbs. ,upper-19 ft. lbs.
rear: all-70 ft. lbs.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
