| From | Message |
sidv
Dodge Dakota
JOIN HERE
11/06/2003
01:50:01
|
 Subject: new grill
IP: Logged
Message:
hello to all my dodge dakota brothers ,i finally finished this grill Ive been working on for years and its almost complete.I just have to work out the last little details but the completion date will be very shortly check it out and tell me what you think , by the way this was a shot taken from the first prototypes and the bottom piece is also complete .More pics will be added once I install it .sidv
http://www.amadevice.com/quiroz/grill.htm
email me at princedamu@aol.com with any q's.
|
Carp
Dodge Dakota
JOIN HERE
11/06/2003
05:38:14
|  RE: new grill
IP: Logged
Message:
Honstly it looks like Crap. it dont fit right by the looks of the photos.
|
Captain Ron
Dodge Dakota
JOIN HERE
11/06/2003
19:37:53
| RE: new grill
IP: Logged
Message:
I agree with carp. Make it fit better, and then you can take it and use it as a grill for your BBQ.
|
sidv
Dodge Dakota
JOIN HERE
11/06/2003
20:19:29
| RE: new grill
IP: Logged
Message:
like i saoid before its a prototype of the one i have now ,more pics are on their way.
|
Darryl
Dodge Dakota
JOIN HERE
11/06/2003
20:36:23
| RE: new grill
IP: Logged
Message:
Dude, that is the single worst grill design that I have ever seen.
"A" for effort "F" for design, good luck!
Darryl
|
aden l
Dodge Dakota
JOIN HERE
11/06/2003
21:14:25
| RE: new grill
IP: Logged
Message:
how many slices of toast will it make in 1 go ?
ya might sell a few on ebay people buy
almost anything on there
|
KS_DAK
Dodge Dakota
JOIN HERE
11/06/2003
23:16:52
| RE: new grill
IP: Logged
Message:
i dont think it all that bad. Keep up with making the designs. I dont think picaso was all that great when he started either ;) at least your trying.
|
01Motorsport
Dodge Dakota
JOIN HERE
11/07/2003
09:55:30
| RE: new grill
IP: Logged
Message:
That's a lot of work, there. My only suggestion would be to reduce the number of bars, and make the spacing of the top row match the others (no kinks in the corners). If you're business/ serious, lose the "princedamu".
|
Dak Dude
Dodge Dakota
JOIN HERE
11/07/2003
12:12:09
|  RE: new grill
IP: Logged
Message:
Prototye needs refinement. Slots shouldn't all be the same length. Gives appearance of "squaring off" a curved grill. Picture this......a solid sheet of stainless steel with only a single roe of diamond shaped holes only about 1/2 inch big. At each end of the row, a pair of '57 chevy bumper "bullets". To top it off, remove the ram emblem on the hood, and in its place a huge pair of Steer antlers. I got some good ideas also for the back of the truck. If anyone interested........let me know. BTW, I'm working on the prototype and will offer to sell on e-bay so don't be stealing my idea without giving me credit!!
|
Grill Master
Dodge Dakota
JOIN HERE
11/07/2003
15:59:24
| RE: new grill
IP: Logged
Message:
Dude, that looks like sh*t ! Fit is terrible, squeezed ends, too shiny, too many slots, no support behind the slots, and even the frame sucks.
Go into another line of work.
Don't quit your day job.
Looks like a Weber kettle.
Stinko.....
|
Dave Mitchell
Dodge Dakota
JOIN HERE
11/07/2003
16:07:36
| RE: new grill
IP: Logged
Message:
I would make the slots extend out so they are evenly spaced from the opening the grille sits in.
It would be okay in an SLT that has the chrome accouterments, but my Sport's decor is all trimmed in black and base color.
Is there a way to eliminate the slots at the borders that appear to be where it clips to the grille shell?.
A lot of hard work invested in that.
Don't pay any attention to the flamers. I have noticed many have no constructive criticism to offer and their comments are nothing more than a waste of bandwidth.
Dave
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
