| From | Message |
DrewzR/T
Dodge Dakota
JOIN HERE
10/07/2003
23:40:36
|
 Subject: Need serious help! P0351 Ignition coil
IP: Logged
Message:
Hey all i got that code and my truck died! I have the msd blaster ignition coil and I changed it to the stock and still nothing! Anyone ever seen this??
|
DrewzR/T
Dodge Dakota
JOIN HERE
10/08/2003
01:03:00
| RE: Need serious help! P0351 Ignition coil
IP: Logged
Message:
Alright i checked the coil and there isn't any spark going to it!
I checked all the relays and they are all good!
My buddy said it could be the automatic shutdown relay. But can't find it!
It cranks but wont turn over which explains the no spark thing!
Any help or suggestions would be good before I swap the M1 off and throttle body to take it to the dealer! I really don't wanna do that but I will if I have to.
Thanks
|
IntenseDak39
*GenIII*
10/08/2003
07:21:01
| RE: Need serious help! P0351 Ignition coil
IP: Logged
Message:
do you have the msd 6a or like?
because i always had that code with it.. only means you are getting mega volts... shouldnt cause you to not get spark. Your problem could be elsewhere
400 BB * Crower .513/.513 290/300 cam * 452 heads * Double roller chain * Weiand TG Intake * MP windage tray * Comp Cams Valve Springs * Crane Pushrods * CAT 1.5 RR * MP Bolt set * MP Chrome Dipstick * MP Chrome Timing Cover * MP Wrinkle Valve Covers - modified * MP Electric Distributor Kit
|
Walter
Dodge Dakota
JOIN HERE
10/08/2003
09:04:34
| RE: Need serious help! P0351 Ignition coil
IP: Logged
Message:
Check the fuel pump, sometimes if there isn't sufficient pressure the PCM won't send a signal to the coil to fire.
|
DrewzR/T
Dodge Dakota
JOIN HERE
10/08/2003
09:59:33
| RE: Need serious help! P0351 Ignition coil
IP: Logged
Message:
Intense no I only had the blaster coil!
I look at the pump today!
|
IntenseDak39
*GenIII*
10/08/2003
15:01:09
| RE: Need serious help! P0351 Ignition coil
IP: Logged
Message:
huh... which coil? blaster 2, blaster 3, blaster ss?
because if its the blaster 2, i always had trouble with it because of that stoopid adapter to make the coil wire fit... four times my truck died in the middle of the road while driving because the insides were coming loose
400 BB * Crower .513/.513 290/300 cam * 452 heads * Double roller chain * Weiand TG Intake * MP windage tray * Comp Cams Valve Springs * Crane Pushrods * CAT 1.5 RR * MP Bolt set * MP Chrome Dipstick * MP Chrome Timing Cover * MP Wrinkle Valve Covers - modified * MP Electric Distributor Kit
|
DrewzR/T
Dodge Dakota
JOIN HERE
10/08/2003
19:55:31
| RE: Need serious help! P0351 Ignition coil
IP: Logged
Message:
It was the blaster SS! I swapped it with the old one which worked fine when i took it off. Still nothing! would I need to reset the computer after putting the stock one back on to get it to fire or no? Just a thought.
|
IntenseDak39
*GenIII*
10/08/2003
21:28:23
| RE: Need serious help! P0351 Ignition coil
IP: Logged
Message:
to get it to fire? no.. just double check all your wiring
400 BB * Crower .513/.513 290/300 cam * 452 heads * Double roller chain * Weiand TG Intake * MP windage tray * Comp Cams Valve Springs * Crane Pushrods * CAT 1.5 RR * MP Bolt set * MP Chrome Dipstick * MP Chrome Timing Cover * MP Wrinkle Valve Covers - modified * MP Electric Distributor Kit
|
GraphiteDak
GenIII
10/08/2003
22:07:41
| RE: Need serious help! P0351 Ignition coil
IP: Logged
Message:
Intense, did you get the big block in allready?
I noticed it now listed in your signature so I was curious.
Those 400's are bad ass. Stock they go over 200k miles before burning any oil!
2003 Graphite QC 4X4 4.7 Auto 3.55
Home Brewed Cold Air Intake, Flowmaster 40 series, Modified TPS to .72VDC, Modified IAT. 160° T-Stat.
|
IntenseDak39
*GenIII*
10/09/2003
09:11:53
| RE: Need serious help! P0351 Ignition coil
IP: Logged
Message:
not in yet... but i figured because its sitting next to the 3.9 it was toss up on which one i should sig
400 BB * Crower .513/.513 290/300 cam * 452 heads * Double roller chain * Weiand TG Intake * MP windage tray * Comp Cams Valve Springs * Crane Pushrods * CAT 1.5 RR * MP Bolt set * MP Chrome Dipstick * MP Chrome Timing Cover * MP Wrinkle Valve Covers - modified * MP Electric Distributor Kit
|
DrewzR/T
Dodge Dakota
JOIN HERE
3/16/2004
20:01:58
| RE: Need serious help! P0351 Ignition coil
IP: Logged
Message:
I know this is old but just wanted to post that it was the PCM took a crap for those who ever have this same problem.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
