| From | Message |
Skeletor86
Dodge Dakota
JOIN HERE
6/09/2003
09:05:35
|
 Subject: Towing without the towing package
IP: Logged
Message:
What do I need to get to hookup a small popup trailer that needs the trailer lights hooked up. I did not get the towing package so I only have the ball on my bumper, which I think will handle the popup. Thanks?
|
gps_jetskier
Dodge Dakota
JOIN HERE
6/09/2003
12:14:24
|  RE: Towing without the towing package
IP: Logged
Message:
Check the rating on the bumper (in your manual) for the load rating. Compare it to the wieght of the popup. More over then that, I wonder how it will sit. You want the trailer to be level. Seems to me the bumper will be high. If it's under 1800 pound, you prolly don't need the tranny cooler, however they are always a good idear.
GPS_JETSKIER
01QC, 3"Body Lift, 285 BFG AT's
SS Nerfs, Line-X
Custom Safari Rack & light Bar
|
mb
Dodge Dakota
JOIN HERE
6/09/2003
13:12:03
|  RE: Towing without the towing package
IP: Logged
Message:
Your bumper will tow 2000 pounds... And if the pop-up is lighter than that, then you will be fine in "stock" trim.
I agree that a trans cooler is a "must do" on any Dakota though (towing or not).
Lastly... Go find a "Hoppy Light Mate" (any good auto parts store has them) for your wire set up. They "plug right in" and take only minutes to get you up & running with your lights.
|
Skeletor86
Dodge Dakota
JOIN HERE
6/09/2003
13:38:47
| RE: Towing without the towing package
IP: Logged
Message:
Thanks guys. I will find the kit and plug her in. I have the 5 spd and it handles everything so far.
2001 QC 4x4 4.7 5spd 3.92 LSD
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
