Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
17:49:24 - 03/28/2024

General Dakota Board
FromMessage
Joe E.
Dodge Dakota
JOIN HERE
 Email

3/16/2003
18:56:16

Subject: Dist cap/rotor HELP HELP..
IP: Logged

Message:
I got a new brass cap and rotor. So I go out to try to replace it today. Got the cap off fine. BUT the ROTOR WILL NOT COME OFF.

I tried to pry it off, and muscle it off. But that sucker is not commen off. Is there a trick? My 1990 dak is a V6 2wd.

Help me out here. Thanks
Joe E.



adam
Dodge Dakota
JOIN HERE


3/16/2003
20:15:46

RE: Dist cap/rotor HELP HELP..
IP: Logged

Message:
i just installed a new rotor and cap on my 97 5.2L v8. really tight place to work, but the rotor came off fine, all i did was pull straight up on it. tomorrow i will order some JBA red wires for 50 bucks. hope this helps



Joe E.
Dodge Dakota
JOIN HERE
 Email

3/16/2003
20:33:42

RE: Dist cap/rotor HELP HELP..
IP: Logged

Message:
Yeah, thats what I expected too. But the darn thing is on there. I looked in my chiltons manual and etc. and they mentioned might having to pry it off. Thanks for the help.

Any other suggestions?
Joe E.



Joe E.
Dodge Dakota
JOIN HERE
 Email

3/16/2003
23:45:35

RE: Dist cap/rotor HELP HELP..
IP: Logged

Message:
help.....
Joe E.



JKnPA
Dodge Dakota
JOIN HERE
 Email

3/17/2003
07:38:36

RE: Dist cap/rotor HELP HELP..
IP: Logged

Message:
Joe E.
It should pry off. Use a wide blade( screwdriver) and pry carefully from below. Use something to cushion the screwdriver from the distributor base, so you don't 'nick' anything.
Rotate it slightly and slowly pry.
Should work......

John......




Joe E.
Dodge Dakota
JOIN HERE
 Email

3/17/2003
14:33:10

RE: Dist cap/rotor HELP HELP..
IP: Logged

Message:
Thanks man. I finally got it off earlier. I ended up taking a 3/4 in wrench and prying it off the dist shaft. But man it was on there. When I inspected it, it was bad. All the terminals were green. It looked like the rotor end had been rubbing the caps top for a while.

So all in all, It has helped my responce and stuff. Thanks for the help.
Joe E.



JKnPA
Dodge Dakota
JOIN HERE
 Email

3/17/2003
18:31:18

RE: Dist cap/rotor HELP HELP..
IP: Logged

Message:

Joe E.
Sounds like it was on a "little too long".
Good luck....

John.... Spring has sprung in PA, I think...



Joe E.
Dodge Dakota
JOIN HERE
 Email

3/17/2003
20:58:11

RE: Dist cap/rotor HELP HELP..
IP: Logged

Message:
Alittle is putten it lightly. But yeah its runnen good now.

I know summer has sprung here in FLA.

Later and thanks,
Joe E.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.