| From | Message |
RJ
Dodge Dakota
6/26/2001
20:35:42
|
 Subject: Help! no power
IP: Logged
Message:
I was hoping someone could help me out.I have a 93 dakota with the v6.Last week it started runnin real bad as no power from a start,or pulling.Brought it to a garage and they replaced timing chain cause of too much sloop and was off by two teeth.No difference.They found a loose hall plate thing in the distributor,so I replaced the distributor.Still no difference.Tonite they tell me that they put it on the computor and it's not completing some kind of loop that's it's suppose to.And the timing is not starting to advance until it gets up in the rpms aways.Any ideas out there.Thanks for the time.
|
1FLAMED92DAK
Dodge Dakota
JOIN HERE
1/29/2002
22:32:10
|  RE: Help! no power
IP: Logged
Message:
Hey Check your SBEC computer I had to replace mine so i went with the MOPAR replacement and i havent had a problem since. A PLUS you can get a core charge for you stock one that is a POS. Piece Of S H I T.
|
BlkV6
GenII
4/30/2002
01:44:22
|  RE: Help! no power
IP: Logged
Message:
Same prob here until i fixed it.97 V6 .I had no power at all took it to shop they ran tests and fixed something in the transmission cost was around 700$.
Jason
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
