| From | Message |
Rick
Dodge Dakota
JOIN HERE
9/08/2006
10:12:52
|
 Subject: 97 Dakota Wiper Arms
IP: Logged
Message:
I'm trying to remove the wipers arms on my '97 Dakota. I know there is a decorative cover that can be removed and I've removed the nut underneath but I can not get the wipers off. There is a small inset on each side of the wiper arm at the nut that looks like a puller might be needed. Are they just pressed on and do I need a puller to get them off? There is no leverage beneath the wiper since the cowling is plastic.
Thanks
|
Obio3
Dodge Dakota
JOIN HERE
9/08/2006
16:44:32
|  RE: 97 Dakota Wiper Arms
IP: Logged
Message:
They are a wedge fit and the nut sucks them together pretty good otherwise they would wear out in nothing flat. As a rule you can wiggle them off while pulling hard. I've never had to do this any other way myself.
So many problems .... So little time
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
