| From | Message |
88dakota
Dodge Dakota
JOIN HERE
9/28/2002
12:27:29
|
 Subject: MTX
IP: Logged
Message:
I own a 88 3.9L dakota reg cab 4x4 std. I have a DEH 6400 pioneer deck with a rockford 150s amp that powers 2 MTX thunder 6000 in a sealed box,my amp is bridged so it puts out 300watts but the subs are rated for 250watts max each and the amp gets pretty hot, I was wondering what I should have the gain at or is that amp just to small. and what do you think are better MTX thunder6000 subs or Rockford Fosgate Hz2's.thanx
|
92Dak
Dodge Dakota
JOIN HERE
9/28/2002
12:34:26
|  RE: MTX
IP: Logged
Message:
A 50 watt amp can be hooked to 2000 watt subs as long as the ohm ratings are not exceeded on the amplifier. You probably have your 6000's wired in parallel presenting a 2 ohm load to the amp (if you have 4 ohm subs).
This is why it is getting hot.
HX2's will hit a LOT harder than the MTX's.
Thats just a guess on the amp wiring though
|
88dakota
Dodge Dakota
JOIN HERE
9/28/2002
16:30:02
| RE: MTX
IP: Logged
Message:
yeah I have the amp bridged would it be better without it bridged I think I'm going to return my MTX's and get the Rockfords.if you have hotmail add me stu194@hotmail.com
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
