| From | Message |
sote
Dodge Dakota
JOIN HERE
8/21/2002
14:15:11
|
 Subject: 97 dodge dakota radio wiring codes
IP: Logged
Message:
I am trying to install a new cd player in my truck and i can't figure out the wire codes behind the factory deck
|
97grndak
Dodge Dakota
JOIN HERE
9/25/2002
00:08:18
|  RE: 97 dodge dakota radio wiring codes
IP: Logged
Message:
dude...just get a wire harness and is should tell u everthing u need to install it, if i am not mistaken all the wires are color coded so u just have to splice them into the wire harnes and your set.and if it doesnt try looking in your manual.
|
pondhopr
Dodge Dakota
JOIN HERE
9/25/2002
06:12:12
| RE: 97 dodge dakota radio wiring codes
IP: Logged
Message:
Get a wiring harness. Even Wal-Mart sells them. Last thing you want to do is go hacking of the factory plug!
|
Tom yost
Dodge Dakota
JOIN HERE
12/18/2003
18:35:31
| RE: 96 dodge dakota radio wiring codes
IP: Logged
Message:
I took out a radio out of my 96 dodge ram and i put it back in and it says code and i dont have a book so i wa wondering wat the code might be please replay
|
Kevin
Dodge Dakota
JOIN HERE
12/21/2003
11:39:59
| RE: 97 dodge dakota radio wiring codes
IP: Logged
Message:
Check out this site for the error code descriptions...
http://www.allpar.com/fix/codes.html
The stock systems have a PCI cable connected to them. If you removed the stock radio, it might have registered that something was faulty in your stereo system.
I just changed out my head unit with a new Sony unit which obviously doesn't have the PCI connection to the computer...I haven't checked to see if any error codes have popped up yet.
|
KrazyDakota02
Dodge Dakota
JOIN HERE
1/16/2004
20:46:20
| RE: 97 dodge dakota radio wiring codes
IP: Logged
Message:
Guys... Get a wire hardness, Simple ask for wire hardness for 97 dodge dakota *whatever the year is and the make too* and then they ll pull out one that is right for you!... then you just wire the colors to the colors... remember the stripped line represents the negative or ground matter. so check the booklet that comes with wire hardness and it ll help you out what you need to do... If you still dont get it... Send your car in the shop and pay them to do it for you... Choice is yours... Also dont forget if the radio still doesnt work... its the black wire that the radio has to be directly grounded to the metal part of the car *you ll see the metal area in the dash panel after taken the radio out...* thats all folks, and i wont be back here. and you all are welcome for my reply... laterz
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
