| From | Message |
kim
Dodge Dakota
JOIN HERE
8/02/2002
17:00:30
|
 Subject: how do i...
IP: Logged
Message:
how do i bridge an amplifier? i have a rockford fosgate power 450s 2 channel and i want it to be bridged for one subwoofer at 4 ohms. if the speaker is dvc 2 ohms, should i wire it parallel or series and how do i do that to be 4 ohms. thanks for the help
|
joe
Dodge Dakota
JOIN HERE
8/03/2002
02:03:21
|  RE: how do i...
IP: Logged
Message:
you will bridge the amp by either using the left+ and the right-. or the right+ to the left-. it should say in your manual or on the amp. if not visit fosgate on the web. you will wire the sub in series to get 4 ohms.
|
Bradley Nowel
Dodge Dakota
JOIN HERE
11/10/2003
23:37:36
| RE: how do i...
IP: Logged
Message:
How do i connect 2 12" w3v2 JL Audio to a brighed Q2801 Audiobahn amp to bump at the fullest in full blast
|
Bradley Nowel
Dodge Dakota
JOIN HERE
11/10/2003
23:44:27
| Subject: how do i...
IP: Logged
Message:
How do i connect 2 12" w3v2 JL Audio to a brighed Q2801 Audiobahn amp to bump at the fullest in full blast
|
brett
Dodge Dakota
JOIN HERE
12/04/2005
00:19:03
|  RE: how do i...
IP: Logged
Message:
alright if any one can please help me i would greatly appriciate it.. i just got a cuspid(?) 1600 watt 4 channel amp.(4 ohms to 4 channels)..and i got 2 10' power acoustic subs.(dual 4 ohm voice coil)..i need to know how do i bridge the amp(bc im only running the 2 suns off of it) and how do i need to have my subs wired??.. ( do i need to have them(my subs) set up for 2 ohms to get the most power since im bridging my amp) please some one help me!!!
|
brett
Dodge Dakota
JOIN HERE
12/04/2005
00:21:44
| RE: how do i...
IP: Logged
Message:
oh sorry i forgot to add that both of my subs max out at 800 watts if that helps any...
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
