| From | Message |
bigred_chip
Dodge Dakota
JOIN HERE
5/07/2002
23:45:01
|
 Subject: Wiring through the firewall
IP: Logged
Message:
I need to find out the best place for running wires to install my new amp. I have looked up and down the firewall and see no spots... HELP!!!!
|
dodgeee-O
Dodge Dakota
JOIN HERE
5/08/2002
02:24:22
|  RE: Wiring through the firewall
IP: Logged
Message:
What year and model dak do you have? I had no problem running 1/0 through a grommet in my 2001 drivers side panel. Take off the pannel located next to your e-brake and then lift back the carpeting. That's where mine is located!
|
bigred_chip
Dodge Dakota
JOIN HERE
5/08/2002
13:52:42
| RE: Wiring through the firewall
IP: Logged
Message:
I have a 1992 Dakota Sport ext, cab. What is a grommet?
|
R/Truck
Dodge Dakota
JOIN HERE
5/08/2002
15:13:53
| RE: Wiring through the firewall
IP: Logged
Message:
A grommet is a small animal that controls where your wires go.
Actually its a rubber ring with a hole in it that protect the wire from getting cut by the metal hole. Without it you will have a nice little smoke show if it ever rubbed through the wire insulation and grounded out.
|
mickw82
DakotaEnthusiast
5/09/2002
22:35:34
| RE: Wiring through the firewall
IP: Logged
Message:
i run 8ga through the opening where the wire for the hood release goes... just pull the rubber boot back a little and jsut push it back in place when wire is through... then from there put the wires wherever u desire..!
Mick
|
bigred_chip
Dodge Dakota
JOIN HERE
5/10/2002
01:09:49
| RE: Wiring through the firewall
IP: Logged
Message:
alright i got it finished... thanks for all the help!!!!!
|
JimiD
Dodge Dakota
JOIN HERE
4/29/2016
08:55:29
|  RE: Wiring through the firewall
IP: Logged
Message:
Big help! thanks!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
