Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
22:36:25 - 04/18/2024

Custom Audio
FromMessage
joe
Dodge Dakota
JOIN HERE
 Email

5/11/2005
11:19:42

Subject: 2 12" subs in ext cab dak
IP: Logged

Message:
I have two 12" RF's that I would like to have installed in a custom box that would replace the tool tray in my 00' Dak Ext. Cab. I have contacted soundoffaudio in FL but they have been unable to build such a box. Does anybody have a recommendation as to where I can get something like this built? thanks.



VTDakota03
Dodge Dakota
JOIN HERE
 Email

6/27/2005
23:01:29

RE: 2 12
IP: Logged

Message:
Just do what I did and build it yourself. Take out the back seat
and the tray underneath it and go from there. I had a bunch of
scrap 3/4" plywood lying around that I used just to experiment.
It came out design wise better than I thought so I haven't gotten
around to building the mdf one yet :). I just measured, cut
measured, cut. measured and cut. I built it as it sat in the back
of my truck. You just have to remember that the larger the
speaker the more volume you need so you will have to go
higher. 3" is about the limit if you want the seat belt locks to be
accessable. The rear seats are going to be mounted directly to
the hinged lid. I also put holes in the front to allow movementof
air created by the subs. In the middle I have a space where my
RF 800a2 is located. It's all underneath the seat and there NO
wires showing at all. It sounds intimidating, but once you get
going it's kind of fun. If you need some direction let me know.

LM



David
Dodge Dakota
JOIN HERE
 Email

7/23/2005
00:19:36

RE: 2 12
IP: Logged

Message:
VTDakota03 - If you have any pictures of the box you built, could you post them?



VTDakota03
Dodge Dakota
JOIN HERE
 Email

7/24/2005
09:52:58

RE: 2 12
IP: Logged

Message:
Hi. I have changed the design a little on paper, but this is the basic
idea. Not much different than the Thunderforms in concept.
REMEMBER THIS ONE IS ONLY AN EXPERIMENT. The final one is
going to be made of MDF, carpeted and the height will be a little
taller.

http://homepage.mac.com/laish/PhotoAlbum10.html

LM



David
Dodge Dakota
JOIN HERE
 Email

7/24/2005
14:53:36

RE: 2 12
IP: Logged

Message:
Does you back seat still fit like it did before? Your box looks taller than what my seat would fit.



cary
Dodge Dakota
JOIN HERE
 Email

7/28/2005
01:45:32

RE: 2 12
IP: Logged

Message:
what kind of truck was it you were looking at putting it in i have a 95 dakota and ii am running 2 10's in the back sets stell in working email me at daytonaz@gmail.com if yopu need help or what not



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.