| From | Message |
BAE984
Dodge Dakota
JOIN HERE
2/13/2005
14:15:30
|
 Subject: Stock pre-amp wiring Q
IP: Logged
Message:
I've replaced my factory infinity components with CDTs, but I've decided I need an amp to push them properly. I want to keep the stock head unit for now, so I'm wondering if anybody knows what the voltage is on the stock pre-amp wiring. Do I need a hi/lo converter, or are they compatible with an aftermarket amp if I tap the pre-amp wires as is?
|
Keith
Dodge Dakota
JOIN HERE
2/13/2005
23:19:24
|  RE: Stock pre-amp wiring Q
IP: Logged
Message:
I just replaced my factory amp in my 2002 CC as well. The input from the stock head unit to the stock amp are speaker level inputs.. I chose an amp that had both pre amp inputs and speaker level inputs. I extended the factory wiring to the new amp and all worked well using the speaker level inputs on the new amp..
|
BAE984
Dodge Dakota
JOIN HERE
3/01/2005
15:24:52
| RE: Stock pre-amp wiring Q
IP: Logged
Message:
OK, thanks. My wires are in place, I'm just waiting on delivery of my amp. I decided to go with a speaker->pre-amp converter from circuit city. Hope it works ok.
|
BigblueQC
GenIII
3/03/2005
06:52:25
| RE: Stock pre-amp wiring Q
IP: Logged
Message:
I wrote about a wiring harness "adapter" that plugs in between stock harness and back of factory radio, it gives you (2) pair of pre-amp rca outputs. I think the name had something to do with "Chrysler OEM", but I am not sure. Do some searches under the audio section, you might find it. It works great
2002 QC 4x4 Sport Plus, 4.7L, auto, Patriot Blue, Tire & Handling group,
Heavy Duty Service group, Leer cap w/out windows, Mopar Step bars and roof rack, Rhino liner in bed and on step bars, Pace Edwards Power Tailgate lock
3.55 rear, 4-wheel anti-lock brakes, all possible fluids are AMSOIL
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
