| From | Message |
Lvpioneers54
Dodge Dakota
JOIN HERE
1/16/2005
18:37:56
|
 Subject: Amp not workin
IP: Logged
Message:
My amp is not working!!! Its a Legacy series 2 amp and I have all the lines run except its not turning on when I start up my truck. there is power running to it but its not turning on i need help!! any ideas????
|
dadak
Dodge Dakota
JOIN HERE
1/16/2005
20:21:44
|  RE: Amp not workin
IP: Logged
Message:
when you say there is power running to it, do you mean the power light is on but the speakers aren't putting out sound? do you have speakers hooked to it, cause some amps don't turn on without speakers connected. and i would also check to make sure you ran the amp turn-on lead to the right wire from player. i believe most are a blue/white wire.
|
lvpioneers54
Dodge Dakota
JOIN HERE
1/16/2005
20:29:25
| RE: Amp not workin
IP: Logged
Message:
The power light does not come on...but there is power running through the cable. Someone mentioned that the fuse might not be big enough on the power cable could that be it? and I have my speakers attached everythings hooked up correctly but the power light does not come on
|
dadak
Dodge Dakota
JOIN HERE
1/17/2005
01:48:56
| RE: Amp not workin
IP: Logged
Message:
could be. i'd check into that too. if your sure that all your connections like rca's, turn-on lead, power cable and speakers are wired correctly then check your ground. do you have it grounded correctly--bare metal with no paint? if you know for a fact it isn't any of these connections then check into the fuse thing. to get the right size fuse you would need for one amp you just need one that either matches or is slightly more than your amps fuse rating.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
