DavesDak
Dodge Dakota
JOIN HERE
10/10/2003
13:18:23
|
 Subject: HELP!!!!!
IP: Logged
Message:
I have got to turn my lease truck back in, so i disconnected my amp from the factory head-unit, (didnt cut any wires). Covered the wires back up, with electrical tape, everything back to normal, and I put my dash back together. after that i reinstalled the factory orange corners, and wired the wedge corner bulbs back in. i guess i put the 3157 bulbs in wrong cause when i turned on the parking lights, 2 burned out. then I replaced them, and the fuse poped. So i replaced it, and it was fine, but once I started the motor, it poped again. so i took the dash apart, replaced the fuse, and disconnected the radio. turned on the lamps fuse poped. I disconnected the 2 corner wedge bulbs, and it poped again when I replaced the fuse. Anyone else had this problem?? The only wires I cut were the corners, and I spliced them back together, adn when I disconnected them it still wouldnt work. The only way I can get them to stay on it with a 25 amp fuse instead of 20 amp. Anyway else have this problem? Any ideas.. I will try anything to not have to go to the dealer monday...
Thanks!!!
03 cc dak
|
RE: HELP!!!!!