| From | Message |
Ryan
Dodge Dakota
JOIN HERE
6/25/2003
20:26:04
|
 Subject: install problem
IP: Logged
Message:
I just got a 97 5.2L quadcab Dakota and want to put my system from my old mustange in it. I have 4 zabco amps pushing 3 10"W6 JL subs and a pair of Q-series MB Quarts. I also have fuse block and a 2.0 digital power cap.
How in the heck can I fit all this in my truck?
Is there a way I can put all 3 subs under the back seats? I was thinking about leaving one of the subs and amps out.....any thoughts?
Thanks for the input,
Ryan
|
Martin
Dodge Dakota
JOIN HERE
6/25/2003
20:40:52
|  RE: install problem
IP: Logged
Message:
Well your not going to get all that stuff in there... Lots of threads on this.. Only thing that seem to work is center consoles...Unless you do a cut thru or sacrafice your whole back seat... then the quad is useless..I put a 10in Kicker solobaric in a custom made center console..heres the link
http://photos.yahoo.com/dbrain0
Martin
2002 Quad, 4.7, Stock...
|
HSKR
Dodge Dakota
JOIN HERE
6/26/2003
04:13:50
|  RE: install problem
IP: Logged
Message:
I'm going to assume you mean club cab since the Quad cab wasn't introduced until 2000. With a custom box and a slight lift of the rear seat, you can get all three subs back there, but really no place to mount the amps out of the way, so you might was well just realize in order to use it all you're going to give up your back seat for hauling people at least. I've got to 10"s and two amps in the back seat of my truck. The IDQ 10's are mounting in the MTX T-form box which fits under the rear seats, and because of my hieght, nobody rides behind me so the amp for my subs is on the floor behind drivers seat, and amp for components is on the center hump which required me to cut a notch out of the bottom of my center console, but also allowed me to route all my wires though the center concole to hide them.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
