| From | Message |
hardbody
Dodge Dakota
JOIN HERE
4/20/2003
21:43:35
|
 Subject: need specs on alpine 3553 amp
IP: Logged
Message:
Hello, anyone know the specs as far as wattage that a alpine 3553 amp puts out? Looking for watts x2. x4, bridged etc. Allready looked on alpines web site they don't list this amp. Thanks
|
ja i rule
Dodge Dakota
JOIN HERE
5/17/2003
02:16:04
| RE: need specs on alpine 3553 amp
IP: Logged
Message:
i want to know too
|
joe
Dodge Dakota
JOIN HERE
5/18/2003
02:17:40
| RE: need specs on alpine 3553 amp
IP: Logged
Message:
35 x 4, dont know bridged but it is probably rated at 120 x 2 at 4 ohms or so.
|
Ghost Rider
Dodge Dakota
JOIN HERE
12/19/2007
19:00:10
| RE: need specs on alpine 3553 amp
IP: Logged
Message:
This info is from the side of the box that the Alpine 3553 Amplifier came in. It may be too late to help "hardbody" and "ja i rule", but I'll post it anyway in case someone else needs it in the future.
* 4/3/2 CHANNEL OPERATION: The 3553 can be used as:
a. 4-channel amplifier, producing 35W per channel into 4ohms, or 50W per channel into 2ohms.
b. 3-channel amplifier, producing 35W(4ohms) or 50W(2ohms) into channels 1 & 2 and 100W(4ohms) into the third channel.
c. 2-channel amplifier, producing 100W per channel into 4ohms.
* STATUS MONITOR:
This indicator illuminates in green when the amplifier is on and operational. This light will turn to orange if any internal protection circuitry is activated.
* ACTIVE DIVIDING NETWORK:
A pair of built-in, switchable and independent electronic crossover network at 80 Hz, 18dB per octave, can be used to set up the amplifier for low-pass (tweeter/midrange satellite) application.
* ACOUSTIC COMPENSATION CIRCUITRY:
A selectable(Off or On) equalization curves can be added to the amplifier's output signal, compensating for the inherent non-linearities of the automobile interior. It extends low bass response and eliminates mid-bass boominess, giving the low frequency response of the audio system tightness and accuracy.
* DUO-B FEEDBACK CIRCUITRY:
This stabilizes the amplifier, removes DC offset, and offers excellent total harmonic distortion(T.H.D.) characteristics. It also provides low T.I.M., excellent slow factor, stability, and musicality.
*NO CURRENT LIMITING:
Absence of current limiters in the audio section ensures low T.I.M. excellent transient response, and superb sonic quality.
* S.T.A.R. CIRCUITRY:
The Alpine-developed Signal Transit for Accurate Response circuit topolgy improves sonic properties by reducing interaction between different sections of the circuitry.
* INPUT MODE SELECTOR:
This switch allows the user to specify the input signal entering the amplifier. Among other benefits, it eliminates the need for RCA-type Y-adaptors when bridging the amplifier.
* INPUT CHANNEL SELECTOR:
This switch allows the user to specify the input signal entering the higher power CH3 and CH4 of the amplifier.
* DC-TO-DC SWITCHING MODE POWER SUPPLY:
Provides excellent power output throughout the audio band-width(20Hz to 20kHz). It's soft clipping characteristics ensure superb transient response and musicality.
* FULLY DISCRETE, COMPLEMENTARY OUTPUT CIRCUITRY:
* INDEPENDENT, CONTINUOUSLY ADJUSTABLE GAIN CONTROLS FOR CH1/2 AND CH3/4:
* GOLD-PLATED, SCREW-DOWN POWER AND SPEAKER TERMINALS:
* HIGH PERFORMANCE, LOW NOISE, AUDIOPHILE QUALITY ACTIVE AND PASSIVE COMPONENTS:
* THIRD ORDER(18dB PER OCTAVE) CAPACITIVE/INDUCTIVE POWER SUPPLY INPUT AND OUTPUT FILTERING:
* EXTRA HEAVY DUTY CONSTRUCTION:
|
Toby
Dodge Dakota
JOIN HERE
6/28/2008
16:06:25
|  RE: need specs on alpine 3553 amp
IP: Logged
Message:
would luv to get my hands on a user manual for the alpine 3553. Not sure how to hook it all up for bridging, etc. Want to be able use it to its full potential vs. just a standard 4 or 2 channel amp.
|
Jimmy9190
Dodge Dakota
JOIN HERE
6/28/2008
16:39:26
| RE: need specs on alpine 3553 amp
IP: Logged
Message:
You can call Alpine at 1-800-421-2284, 1-800-Alpine-1 and order a manual. You can also read the manual in pdf format at http://www.alpine-usa.com/US-en/support/.
Any Alpine dealer also will probably have the info you need.
Jimmy
|
marc
Dodge Dakota
JOIN HERE
11/22/2009
17:10:36
|  RE: need specs on alpine 3553 amp
IP: Logged
Message:
My alpine amplifier is orange light don`t operating.....
|
Darren
Dodge Dakota
JOIN HERE
3/27/2010
06:14:30
| RE: need specs on alpine 3553 amp
IP: Logged
Message:
* STATUS MONITOR:
This indicator illuminates in green when the amplifier is on and operational. This light will turn to orange if any internal protection circuitry is activated.
i.e you have short to one of your speakers
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
