| From | Message |
kickerL7
Dodge Dakota
JOIN HERE
4/19/2003
10:02:15
|
 Subject: RE: Kicker L7's
IP: Logged
Message:
how much power does the audiobahn have? Class d amps are more efficient....this doesn't mean that they can't draw a huge amount of power though. If you have a stock electrical system, no upgraded alternator, extra battery(s) then you would probably want a class d. I don't have any experience with audiobahn but the 1200.1 should be a good amp for those subs. It will be underpowering them a bit though, but it should be a good amp. You going to be buying a new amp or used? if you buy a new one you should check out sounddomain. Just go to ebay get a quote from abusiness that sell them on there for like $450 and then sounddomain will pricematch it for you...and sounddomain is an authorized kicker dealer so you won't have any problems with warranty.
|
Jon
Dodge Dakota
JOIN HERE
4/23/2003
22:19:00
| RE: Kicker L7's
IP: Logged
Message:
OK im getting one Kicker 8" L7 but i dont know what ohm i should get 2 or 4 my choice of amps are the kicker 400.1 class d or the 600.1 class D????
|
jon
Dodge Dakota
JOIN HERE
4/24/2003
00:39:39
| RE: Kicker L7's
IP: Logged
Message:
Ok im getting the kicker kx600.1 amp and i have spoke to a couple of ppl and they say go with the dual 4ohm any one have a opinion?
|
kickerL7
Dodge Dakota
JOIN HERE
4/24/2003
18:32:43
| RE: Kicker L7's
IP: Logged
Message:
in order to get full power out of that amp you'll need to get a d4 sub....that's if your only getting one sub
|
loke
Dodge Dakota
JOIN HERE
4/30/2003
04:59:28
| RE: Kicker L7's
IP: Logged
Message:
I have a 86 s10 blazer, will one 1200.1 kicker amp work fine with 2 4ohm 12l7s?what box? sealed or ported?
|
kickerL7
Dodge Dakota
JOIN HERE
4/30/2003
07:26:41
| RE: Kicker L7's
IP: Logged
Message:
that amp will work fine. you will be underpowering them a little. what type of box depends on you. Do you want it to get loud/sound good/or a little of both? Is space a concern? When I had my subs I had each in a 2.88cf box (5.66cf total) w/36 sq. inches of port (72" total). When you build your box don't forget to adjust the box size for port and sub displacement.
|
S10L72
Dodge Dakota
JOIN HERE
7/24/2003
17:18:23
| RE: Kicker L7's
IP: Logged
Message:
Most of you sound pretty educated on this topic. Can anyone explain how to hook up a cap? I have my 4 gauge wire running through the + on the cap and to a distribution block, the power is distributed to two amps and then i grounded the two amps back to the - on the cap and had one big 4 gauge ground for it all? I've had a lot of people say i did it right and others recomending I ground 3 seperate wires.
|
| | <<Previous Page P 5 Next Page>> |
