| From | Message |
OffRoad322
GenIII
 
1/21/2003
00:55:24
|
 Subject: Regular Cab Dakotas Please READ!!
IP: Logged
Message:
Hi all you GEN III Dodge Dakota Regular Cab trucks,
I am still looking to either buy or build a pair of truck boxes that would fit in my 1997 Dodge Dakota Regular Cab. I want to fit two 10" subs behind my bucket seats and center console (one behind each seat).
Will everyone with a regular cab truck post their dimensions of their boxes (NOT BLOWTHROUGHS) and send/post the pictures of their setups? Did you loose a lot of space behind the seats? My main concern is depth of the box. Also what subwoofer brands are you using?
You can send the pics to me if you want at: OffRoad322@aol.com or post them here.
Thanks.
Paul Salmon
1997 Dodge Dakota Sport
5spd 3.9L V6
Flowmaster exhaust, Airaid Intake, Borg Cap & Rotor, 8.5mm Plug Wires, SnugTop Lid, Alpine 7876, Alpine CD Changer,Clifford Alarm, Hurst Billet Shifter, 180 T-stat, BedRug, Clear Corners, Accel Coil, Neons in bed
|
lowdaksport
Dodge Dakota
JOIN HERE
1/21/2003
11:47:52
|  RE: Regular Cab Dakotas Please READ!!
IP: Logged
Message:
i have a kicker comp vr behind my driver's seat. if you are tall it won't work. not a lot of room. my box is 17 inches wide 12 tall 5 deep at the top and 7.25 deep at the bottom.
|
HotshotDakota
Dodge Dakota
JOIN HERE
1/21/2003
21:30:34
|  RE: Regular Cab Dakotas Please READ!!
IP: Logged
Message:
i have a 2002 dodge dakota reg cab
i just took out the jack and stuff behind the pass. seat and now there is plenty amounts of room
i am 6'1 and it is still comf.
|
ruggerp11
Dodge Dakota
JOIN HERE
1/27/2003
16:28:46
| RE: Regular Cab Dakotas Please READ!!
IP: Logged
Message:
I have a 2002 regular cab Dakota with a bench seat. I was wondering if anyone had done any custom fiberglass work on an enclosure behind the seats that would still seat a 5-10 person. I was thinking of installing two eights with an amp between them in a custom fiberglass enclosure. I am pretty sure that there would be enough room for the small speakers but I don't have that much experience with Fiberglass. If anyone has done something like this or might be able to point me in the right direction Thanks in advance :)
|
Hotshotdakota
Dodge Dakota
JOIN HERE
1/27/2003
19:37:43
|  RE: Regular Cab Dakotas Please READ!!
IP: Logged
Message:
There is one thing i know with fiberglass is, that you need to be very careful. It can get expensive if your not
|
ruggerp11
Dodge Dakota
JOIN HERE
1/27/2003
20:02:05
| RE: Regular Cab Dakotas Please READ!!
IP: Logged
Message:
Thanks :)
|
justin
Dodge Dakota
JOIN HERE
1/28/2003
05:55:21
| RE: Regular Cab Dakotas Please READ!!
IP: Logged
Message:
i can make a center console for 1 10" sub...i can prolly figure out the dimensions for a box behind the passenger seat...if u wanna see pics of my console jus email me, i have a few. i got 1 10 in my truck and it hits harder than a few of my friends with 2 equally powered 10's in their cars...
|
ruggerp11
Dodge Dakota
JOIN HERE
1/28/2003
11:19:45
| RE: Regular Cab Dakotas Please READ!!
IP: Logged
Message:
sure send me your email address (sapinto@stthomas.edu). I don't have bucket seats though, so the center sub might not work so well :)
|
Grant
Dodge Dakota
JOIN HERE
1/28/2003
17:28:06
| RE: Regular Cab Dakotas Please READ!!
IP: Logged
Message:
Hey Offroad322, here are the demensions of my box that fits two 10 inch subs behind the bucket seats and centre console. I also can put my third seat back in instead if i want and have that fit perfectly as well with full use of it. So this size of box works for both. The top is exactly 2". The bottom is exactly 8". The height is approx 15 1/4" (i might be off by a 1/4 of an inch). and the length of it is exactly 46". I had to bend the jack holder to make it fit and cut the carpet that went over the jack as well. But now it looks like there was never any jack there and the carpet fits better i find. Hopefully this helps a bit. I think you looked at my webpage a little while ago and asked me. But heres the webpage again to look at a pic of it.
http://www.cardomain.com/id/dakotadude17
|
justin
Dodge Dakota
JOIN HERE
1/29/2003
00:56:51
| RE: Regular Cab Dakotas Please READ!!
IP: Logged
Message:
ud prolly be better off with that guys way...lol...plus mines not fiberglassed...jus mdf
|
dr0p0ff
DakotaEnthusiast
1/29/2003
16:50:06
| RE: Regular Cab Dakotas Please READ!!
IP: Logged
Message:
in the interior section i have pics of my setup and brief descriptions
www.dr0p0ff0nline.com
|
chris
Dodge Dakota
JOIN HERE
1/30/2003
17:10:20
| RE: Regular Cab Dakotas Please READ!!
IP: Logged
Message:
i got a box off ebay that is only 8 inches deep on the bottom. i got it for 21.00+ shipping. it is a single 10' box. but im sure this company that sold me mine has more for 2 10' or 12s.
http://shop.auctionwatch.com/crystaldodge/item/555714225/index.html
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
