| From | Message |
CJ
Dodge Dakota
JOIN HERE
1/05/2003
20:34:23
|
 Subject: What Subs Fit?
IP: Logged
Message:
I hadn't seen any posts on the 8000's fitting in the Thunderform, so I thought I'd give it a try and they definitely do NOT fit...so I was wondering how I can know what subs will fit in the Thunderform. Anything would help!...Thanks in advance
|
97_blk_dak
GenIII
1/06/2003
17:43:42
|  RE: What Subs Fit?
IP: Logged
Message:
I'm curious too. I'm thinking about selling my current setup and going with something a little more stealthy, but want a good quality sub.
PICS
1997 5.2L 4X4 CC
Dakota USA
|
Dakman
Dodge Dakota
JOIN HERE
1/06/2003
20:47:45
|  RE: What Subs Fit?
IP: Logged
Message:
Well so far the best sub that fits in a Thunderform is the Image Dynamics IDQ10 but you have to make sure it version 1(V.1) because the new ones don't fit. So Ebay is your best bet.
|
Greg D.
Dodge Dakota
JOIN HERE
1/07/2003
03:39:30
| RE: What Subs Fit?
IP: Logged
Message:
I recently put in two Image Dynamic IDQ 10's (v1) and they sound very clean in the thunderform, great sound quality for what I'm looking for.
-Greg D.
|
Jay
Dodge Dakota
JOIN HERE
1/11/2003
18:39:33
| RE: What Subs Fit?
IP: Logged
Message:
If you are handy with a screwgun and a saw you might want tu build your own box. You can fit a deeper mount sub that the thunderform. I got plans off this site and have it posted on my site. This road was good for me. I still have my functional back seat for my 2yo son (with car seat).
http://members.cox.net/jgilbert01/truck_pics.htm
|
Anthony
Dodge Dakota
JOIN HERE
1/11/2003
19:29:00
| RE: What Subs Fit?
IP: Logged
Message:
Hey Jay,
Your box came out pretty good!! Those dimensions came from my web site, as I'm the original builder. It's cheap to build and provides excellent BASS!!
Anthony,
www.geocities.com/dak2nv/
|
Joe
Dodge Dakota
JOIN HERE
1/13/2003
21:41:57
| RE: What Subs Fit?
IP: Logged
Message:
The v2's fit , Just tried them tonight but sounddomain sent me the wrong VC config so I am selling one of them !
|
Joe
Dodge Dakota
JOIN HERE
1/13/2003
21:49:00
| RE: What Subs Fit?
IP: Logged
Message:
I also found that the Cerwin Vega Vega series 10's fit also ( very snug but they do fit without trimming ) , But I only have one so I cant tell you how they sound . Also Kicker comps and vrs will fit , Havve to trim a hair to get the vrs in but not bad at all ( buddy did this one) He only had to trim the inside edge a c hair ! Wil post as I try all I can , I have a buddy at a local shop and I am going to try all I can tommorw and let us ALL KNOW WHAT FITS once and for all ! !
|
figitdotcom
R/T
1/14/2003
23:04:54
| RE: What Subs Fit?
IP: Logged
Message:
I have a pair of kicker compvr's in mine, the magnet is about 1/8' too deep so I just cut a rubber ring (maybe rubber, maybe not.. I got it at home depot in a roll and it was cheap).. the compvr's require .8ft of space so the tform is perfect for them. I'm installing my system this weekend, I have another thread started asking about removing my carpet and such.. anyhow I'll let you know how they sound. I heard from here they rock so I assume they will be bada$$
-m
|
Joe
Dodge Dakota
JOIN HERE
1/14/2003
23:10:20
| RE: What Subs Fit?
IP: Logged
Message:
Ok maybe this should end up what doesnt fit !! I went to my buddys store today and tried a bunch ! 10W3 almost but about 1/2" to deep , RF HE's Would fit with a couple seals and the rbber taking off the magnet and suround , IDQ10 dvc "V2" Does fit perfect . Didnt have a older 10w6 to try which is what I really wanted to see if it would fit ! Will try more tommorow
|
Dakman
Dodge Dakota
JOIN HERE
1/15/2003
22:54:26
|  RE: What Subs Fit?
IP: Logged
Message:
Joe, the IDQ10's V.2 really do fit with no mods?
About a year ago several people on this board said without a doubt the V.2 do NOT fit.
Let us know what other subs fit because there is nothing worse then buying something you can't use.
Thanks
|
Joe
Dodge Dakota
JOIN HERE
1/15/2003
23:22:12
| RE: What Subs Fit?
IP: Logged
Message:
Trust me they fit perfect !No mods , One gasket that comes with the Thunderform , They are very close depth wise but they fit , They screw down no problem , The only thing I would do is use 2 gaskets so the vent has a little clearance in the pole piece so they can breath and cool the voice coil , No cutting no nothing , Drop and play ! I actually bought 2 JLWO's today and had to use some foam to bring them up a hair , But my god they really hit for entry level and sound very good in it , I found some round 1/2 solid foam weahterstrip at lowes that brings the sub up just enough to fit , The wo's are a bit to deep but with 2 gaskets they are fine !! Thats all im trying for now , Starting to piss my friends boss off opening all the new subs HEHE I will find a old style W6 sooner or later , Thats the one I want to see that fits or not !!
|
Joe
Dodge Dakota
JOIN HERE
1/15/2003
23:28:08
| RE: What Subs Fit?
IP: Logged
Message:
The JL wo is 5.375 Deep , The IDq10v2 is 5.25 deep , Anyway 5.25 is max depth that could be used with somewhat of a normal size magnet , None of the Cast aluminum frame subs I found fit except the Vega Series and Vega IT Subs , They fit in the hole and fit width but dont sit all the way in the actuall inset ring for the sub mount , A little weatherstrip and they would be fine just to seal it , No cutting with these either
|
Dakman
Dodge Dakota
JOIN HERE
1/16/2003
01:50:52
|  RE: What Subs Fit?
IP: Logged
Message:
Thanks Joe, I currently have IDQ10'S V.1 SVC in my thunderform which I'm happy with, but I'm always looking to upgrade!!
Damn car audio bug....................
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
